Shop by Part
Tail Lights
Real-Time Inventory
Live stock from thousands of sellers
Fast Nationwide Delivery
Quick shipping to your door
Warranty-Backed
Confidence with quality you can trust
Top-Rated Sellers
Trusted recyclers and suppliers
Millions of Parts
Parts for virtually every vehicle
Buying Guide
Tail Lights Buying Guide
Beyond the main headlights, vehicles carry a supporting cast of lighting assemblies that serve specific safety and signaling functions. This guide covers tail lights, parking and bumper lights, and the high-mounted stop light. Most are inexpensive to replace, but matching trim, side, technology, and connector is essential to stay legal and functional.
A cracked or clouded tail light is both a safety hazard and an invitation for a fix-it ticket. Used OEM tail light assemblies offer factory fit and finish at a fraction of new aftermarket prices.
What's Included
The tail light lens and housing assembly. On most used units, bulb sockets are included but bulbs are not. Wiring pigtail connectors are typically attached to the assembly. Not included: any wiring harness beyond the pigtail, mounting hardware, or rear bumper.
Inner vs. Outer — Know Which Section You Need
Many vehicles have two-piece tail light systems: an outer (quarter panel-mounted) section and an inner (trunk lid or tailgate-mounted) section. These are separate parts with different part numbers. Verify which section is damaged before ordering.
Key Compatibility Points
Year, Make, Model, and Trim — some body style refreshes within a generation change tail light design
Body style — 2-door, 4-door, wagon, and hatchback variants often have different tail lights even on the same nameplate
Left vs. Right — always specify driver side or passenger side
LED vs. Halogen
OEM tail lights are designed for a specific bulb type. If your vehicle uses LED tail lights and you replace with a halogen assembly (or vice versa), the turn signal flasher rate may malfunction and the wiring connectors will differ. Match the technology of your original.
Lens Condition
Check the lens carefully: cracks that penetrate through the lens allow water ingress and will cause rapid bulb failure and corrosion inside the housing. Surface scratches and cloudiness are typically cosmetic and can often be restored with a polishing kit if the housing is otherwise sound.
Installation
Most tail lights are held by 2–4 bolts or push-clips accessible from inside the trunk or cargo area. Disconnect the battery before working on lighting circuits to avoid shorts or airbag-related issues on some vehicles.
The front parking/bumper light assembly typically combines the parking (position) light, front turn signal, and sometimes the daytime running light in a single housing. These mount in or around the front bumper and are often damaged in minor frontal impacts.
Key considerations: Match the assembly to your exact year, make, model, and trim — even a slight model year refresh can change the mounting tabs and connector. Bulbs are usually not included. Verify left vs. right on asymmetrical assemblies.
The CHMSL (center high-mounted stop light, or third brake light) must meet specific height and color requirements. On hatchbacks and SUVs it's often mounted in or on the rear glass, in the spoiler, or on the cab of a pickup. LED versions are sealed assemblies that replace as a unit; halogen versions allow bulb replacement. Match the housing shape and mounting location to your vehicle.
Always verify left vs. right on any asymmetrical assembly
Check whether the harness connector shape matches before purchase
LED assemblies for halogen applications (and vice versa) typically don't share the same wiring connectors
Cracked lenses allow water ingress — inspect any used assembly for clear, intact lenses
Disconnect the battery before working on lighting circuits